2SC4432 no.3184-1/3 features ? high power gain. ? high cutoff frequency. ? small cob, cre. ? ultrasmall-sized package permitting the 2SC4432- applied sets to be made small and slim. specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo 40 v collector-to-emitter voltage v ceo 18 v emitter-to-base voltage v ebo 3v collector current i c 50 ma collector dissipation p c 250 mw junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =18v, i e =0 0.1 m a emitter cutoff current i ebo v eb =2v, i c =0 0.1 m a dc current gain h fe v ce =10v, i c =5ma 60* 270* gain-bandwidth product f t v ce =10v, i c =5ma 750 mhz output capacitance cob v cb =10v, f=1mhz 0.7 1.2 pf reverse transfer capacitance cre v cb =10v, f=1mhz 0.45 pf marking : rt continued on next page. * : the 2SC4432 is classified by 5ma h fe as follows : rank 3 4 5 h fe 60 to 120 90 to 180 135 to 270 sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn3184a 2SC4432 high-frequency general-purpose amplifier applications package dimensions unit : mm 2018b [2SC4432] d2001 ts im / d1598 ha (kt) / 7219 yt, ts any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. 1 : base 2 : emitter 3 : collector sanyo : cp 0.4 0.95 0.95 1.9 2.9 0.5 1.5 2.5 0.5 0.16 0 to 0.1 0.8 1.1 2 3 1 npn epitaxial planar silicon transistor
2SC4432 no.3184-2/3 ps continued from preceding page. ratings parameter symbol conditions min typ max unit collector-to-emitter saturation voltage v ce (sat) i c =10ma, i b =1ma 0.2 v base-to-collector time constant r bb c c v ce =10v, i c =5ma, f=31.9mhz 23 ps power gain pg v ce =10v, i c =10ma, f=100mhz 28 db pg test circuit v b l1 : 1mm f plated wire, 10mm f 5t, pitch 15mm, tap : 2t from base side l2 : 1mm f plated wire, 10mm f 7t, pitch 10mm, tap : 2t from v c side l3 : 1mm f enamel wire, 10mm f 3t, pitch 10mm l1 l3 output 50 input 50 v c to 30pf to 30pf to 22pf to 22pf to 5pf 1000pf 1000pf 100 7 5 7 5 3 2 5 3 2 10 h fe -- i c itr06895 v ce =10v v ce =10v f t -- i c 7 5 3 1000 100 2 3 2 7 5 10 1.0 25 3 37 100 25 37 7 1.0 0.1 25 37 10 25 37 2 2 5 37 100 1.0 7 5 7 5 3 2 3 2 0.1 7 5 10 1.0 25 37 0.1 25 37 2 5 3 itr06896 cre -- v cb itr06897 f=1mhz v ce =10v 16 18 20 22 24 28 26 30 pg -- i c power gain, pg -- db 7 523 10 1.0 25 5 3 377 itr06898 dc current gain, h fe collector current, i c -- ma gain-bandwidth product, f t -- mhz collector current, i c -- ma collector current, i c -- ma collector-to-base voltage, v cb -- v reverse transfer capacitance, cre -- pf
2SC4432 no.3184-3/3 0 300 250 200 150 100 50 20 060 40 80 100 140 120 160 p c -- ta itr06900 1.0 10 0.1 57 5 3 27 5 3 27 100 5 3 27 5 7 3 3 5 7 2 1000 3 2 100 v ce (sat) -- i c itr06899 i c / i b =10 collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- ma ambient temperature, ta -- c collector dissipation, p c -- mw specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of december, 2001. specifications and information herein are subject to change without notice. ps
|
